Dahle 40634 Super Micro Cut Shredder
Call Us: (800) 992-5279
Narrow down your selection of "Shredders" products using the following filters
You are here: Home > Paper Machines > Shredders

Dahle 40634 High Security Shredder

  • Sheet Capacity: Up to 16
  • Speed (feet per minute): 27
  • Feed Opening Size: 16"
  • Shred Size: 3/32" x 5/64"
  • Dimensions: 38" x 29" x 20"
  • DoD and NSA/CSI 02-01 approved
Newly added product
FREE Shipping anywhere in US
1 Year
Condition:New 
Warranty:1 Year 
Freight:$0.00 
Be the first to review this product
Read Reviews| Write a Review

General Information

Category:ShreddersManufacturer:Dahle
Security Level:High Security ShreddersSize:Departmental Shredders
Type:Super Micro Cut ShredderModel:40634
MPN:40634UPC:8000
 

The Dahle 40634 super micro cut shredder is suitable for use in departments that have around 10+ people and need to shred highly classified documents. The 40634 high security shredder complies with the level 6 security specification, and is NSA approved according to the NSA/CSS Specification 02-01.

The Dahle 40634 high security shredder features a wide feed opening that enables it to shred large paper sizes. The shredded waste is collected in a large waste bin that will hold a lot of these shredded particles. When the waste bin gets full, the paper shredder stops shredding. The paper shredder uses the help of sensors in the feed opening to automatically start shredding when paper is placed near the feed opening, and stop when there is no more paper. When the paper shredder isn't being used, it goes to sleep mode to save energy costs. If excess papers have been fed, the Dahle 40634 high security shredder automatically reverses them to prevent paper jam. The paper shredder also features metal strippers that keep the shredded paper away from the cutting blades to prevent paper jam. The Dahle 40634 high security shredder automatically oils the cutting blades to optimize the shredding process.

  • Complies with NSA⁄CSS 02-01.
  • Reduces energy costs with Auto power save mode.
  • Mounted on rubber shocks for quiet operation.
Shredders Security Standards

Paper shredders fall into six levels of security level 1 (lowest) to level 6 (highest) as defined in DIN32757. These levels have been defined under different considerations about information media and security required. For normal home use then a lower level of security is suitable. For an office where information such as personnel and wage documents are being disposed, then a higher level (cross cut shredder model) would be suitable.


Level 1

Description:

Best for low level security – general paperwork

Usage:

For shredding general internal document like vouchers, forms, etc

Cutting:

12 mm (0.47" ) strips

Standard Measurement:

Strip cut 10.5 mm (0.41") | Particle Size 10.5 x 40 - 80 mm (0.41" x 1.57"-3.14")

Level 2

Description:

Ideal for Everyday documents

Security Level
Usage:

For internal documents such as notes, invoices, printouts, photo-copies

Cutting:

6 mm (0.23") strips

Standard Measurement:

Strip Cut 3.9-5.8 mm (0.16"- 0.25") | Particle Size 7.5 x 40 - 80 mm (0.295" x 1.57"-3.14")

Level 3

Description:

Designed for Confidential documents

Security Level
Usage:

For confidential documents, such as company internal documents, personal data

Cutting:

2 mm (0.078") strips/cut (Confidential)

Standard Measurement:

Strip cut 1.9 mm (0.074") | Particle Size 3.9 x 30 - 50 mm (0.15" x 1.18" - 1.97")

Level 4

Description:

Designed for Sensitive documents

Security Level
Usage:

For secret documents, such as documents and files relevant to the safeguarding of personal livelihood or a company's existence.

Cutting:

2 x 15 mm particles (Commercially Sensitive)

Standard Measurement:

1/6" x 9/16-5/8" Cross Cut

Level 5

Description:

Designed for Top Secret - Secret documents

Security Level
Usage:

Designed and approved by the U.S. Department of Defense and the Canadian R.C.M.P. for top secret shredding. Ideal for high-security requirements.

Cutting:

0.8 x 12 mm particles (Top Secret or Classified)

Standard Measurement:

1/32" x 3/8-1/2" Cross Cut

Level 6

Description:For Highest Security - (Not DIN listed- this level of security is not listed in DIN32757 standardsSecurity Level
Usage:

This is the highest level of shredder security currently available. Backed by the U.S. government and the NSA. Ultra secure shredding for the most sensitive documents.

Cutting:

0.8 x 4 mm particles (Top Secret or Classified)

Standard Measurement:

1/32" x 5/32" Cross Cut

Safety Precautions


    Please read operating instructions before putting the machine into operation and observe the safety precautions. In case of any concerns please feel free to contact us
  • Children must not operate the machine!
Children must not operate the machine
  • Do not reach into the feed-opening of the cutting head!
Do not reach into the feed-opening of the cutting head
  • Long hair can become entangled in cutting head!
Long hair can become entangled in cutting head
  • Take care of ties and other loose pieces of clothing!
Take care of ties and other loose pieces of clothing!
  • Be careful of loose jewelery!
Be careful of loose jewelery!

Write a review

Your Name*
  
Review Title*
  
Your Email (Optional, your email is confidential and will not be shared with any one else)
  
Location
  
Your Comments*
  
Rating*:      Bad      Good 
M*IA  
  • Dahle started in 1930 and manufactures products that meet the severe safety standards for personal and professional grade products. These products include shredders, trimmers, sharpeners, laminators, binding machines, presentation products and other office accessories.
    Dahle’s primary products are shredders and trimmers. The popular shredders are 30434, 20090PSe and 21015. These are popular among businesses and government organizations. Dahle uses solid cutting cylinders that are milled from German Solingen Steel in machines, and these are guaranteed to last a lifetime.
    Dahle shredders are mainly manufactured in Germany with some smaller domestic, small office and home office machines manufactured in China. The company aims to make quality products designed to meet the demands of an ever changing workplace. Dahle Shredder is accepted as the industry standard for quality and heavy duty construction while maintaining extremely competitive pricing. Dahle's winning combination of design and engineering excellence is further improved by an experienced sales, service and support team.

  • High security shredders cut unwanted confidential material, ensuring they don’t fall in the wrong hands. They offer the highest level of security and are ideal for government organizations, military and any business that needs to shred highly classified documents.
    High security shredders are available in deskside, office, departmental and heavy-duty models. Martin Yale, Kobra, MBM and Dahle are the major manufactures of high security shredders.
    Intimus’s VZ14.00 is the popular high security shredder.

    Departmental Shredders

    Departmental shredders cut unwanted confidential material, ensuring they don’t fall in the wrong hands. They are used for shredding high volume, and handle large volumes of paper. They have a wider feed opening so that they can shred bigger stack of papers at the same time.
    Dahle, Clary, GBC, Kobra, Martin Yale and MBM specialize in manufacturing departmental shredders. Popular shredders are Dahle’s 30406, Clary’s 3800S, GBC’s GDS2213, Kobra’s 385 S4 and 390 S5, Intimus’s 452CC and 702, and Destroyit’s 3803SC.

  • Specifications

    Shred Size3/32" x 5/64"
    Sheet CapacityUp to 16 sheets
    Speed27 ft/min
    Shred TypeSuper Micro Cut
    Feed Opening16"
    Waste Container Volume45 gallons
    Product Dimensions38"H x 29"W x 20"D
    Shreds StaplesNo
    Shreds Paper ClipsNo
    Auto On/OffYes
    Auto ReverseYes
    Bag Full IndicatorYes
    Continuous Duty MotorYes
    Voltage120
    Horse Power2.2

    Related Products

    Our Price:  $321.73
    Our Price:  $288.32
    Our Price:  $1,583.00
    Customer Testimonials
    maureencasper

    "I worked with Kevin Wong who was extremely helpful. The original shredder I ordered was out of stock, and within a few hours of my order he emailed me letting me know, and also suggested a similar shredder. I appreciate all of his help!"

    ColetteM

    "We needed shredder bags and oil for our machine ASAP and it was very easy and convienant to order it online through your website. The bags/oil were shipped within a timely manner and we will definitely be using your company for our future orders. Thanks Clary!ColetteRSD"

    View All Testimonials >    
    We accept these payment methods VISAMaster CardPaypal CheckoutAmerican Express