|Category:||ID Card Printers and Systems||Manufacturer:||Magicard|
|Capabilities:||Single Side Printing||Color Type:||Color|
|Encoding:||HiD iClass, MIFARE / DESFire||Printing Volume:||10000+|
The innovative Prima reverse transfer printing technology
Get the highest print quality with the Prima 3.
The Inline Lamination Unit module integrates exclusively with the Magicard Prima. A compact, single-sided laminator, it delivers an outstanding lamination result with all possible options. When used with an optional Turnover Unit, the Inline Lamination Unit can laminate both sides of the card. By using two Inline Lamination Units and a Turnover Unit, both sides can be laminated with different types of laminates. Regardless of whether thin holographic film or patches in various thicknesses are used - the result is always superb
The key advantages of Reverse Transfer or Retransfer ID card printing technology are high print quality, the ability to print on myriad card types and increased abrasion resistance
The ID card images are transferred (or sublimated) from the YMCK dye film onto a clear film which is then laminated entirely onto the card, with the image underneath. In comparison, the traditional direct to card printers apply the dyes from the YMCK film directly to the card, diffusing the dyes into the surface followed by a clear layer of acrylic. Both methods use YMCK dye films, but the reverse transfer method uses an additional polyester based transfer film.
The reverse transfer process works like this: The ID card images are transferred (or sublimated) from the YMCK dye film onto a clear film which is then laminated entirely onto the card, with the image underneath. In comparison, the traditional direct to card printers apply the dyes from the YMCK film directly to the card, diffusing the dyes into the surface followed by a clear layer of acrylic. Both methods use YMCK dye films, but the reverse transfer method uses an additional polyester based transfer film.
|Get the highest print quality with the Prima 3. |
The reverse-transfer Prima is ideal for producing top quality, durable cards. The quality of the finished card is similar to that achieved by off-set litho printing, but with the advantage that every card can be different.
One of the key advantages of Reverse Transfer or Re-transfer ID card printing technology is the increased yield when printing technology cards for access control. Cards constructed with embedded technologies such as IC chips or antennas typically have inconsistent surfaces. Direct to card printers require a completely flat print surface to achieve high quality images. Reverse transfer printers print on the reverse side of a clear film which is then laminated onto the card surface resulting in consistently high quality printed cards.
Images printed by the reverse transfer technology method tend to wear longer then cards printed by the direct to card printers. The process works like this: in addition to a color YMCK-type ribbon that all dye sublimation direct-to-card printers use, Re-transfer printers include a second clear polyester-based Re-transfer ribbon, often referred to as the Re-transfer "film". Instead of transferring dye directly from the YMCK-type ribbon onto a card, Re-transfer printers transfer, or sublimate, the dyes onto the clear Re-transfer film, then laminates this film to the card.
The advantages of Reverse Transfer technology are:
The ILU (Inline Lamination Unit) module integrates exclusively with the Magicard Prima. A compact, single-sided laminator, it delivers an outstanding lamination result with all possible options.
When used with an optional Turnover Unit, the ID card laminator can laminate both sides of the card. By using two ID card laminators and a Turnover Unit, both sides can be laminated with different types of laminates. Regardless of whether thin holographic film or patches in various thicknesses are used - the result is always superb.
Connecting the ILU (Inline Lamination Unit) to the Prima printer is very easy using the provided joining plate. Simply position the printer and laminator side by side locating the feet through the appropriate alignment holes in the plate. Plug in the communication cable and you are ready to print and laminate cards.
Loading the over laminate rolls is extremely user friendly, the rolls are front-loaded, similar to the Prima printer. The ID card laminator is user programmable. Temperature and speed settings can be adjusted via the front panel display for optimum results with all card materials, including PVC, PVH, ABS, 100% PET and even Polycarbonate.
Lamination materials include thin holographic overlays and 0.5 mil and 1 mil patch laminates available in clear or custom formats.Double-sided lamination
In addition to the single-sided ID card laminator described above, we also have available various Double-sided lamination options. You can choose between a double-sided laminator, which puts the same laminate on both sides of the card, or two single-sided ID card laminators used in line, which allows for different laminates on the front and back of the card. Please contact us to specify your lamination solution.
Magicard started in 1993 and is one of the pioneer manufacturers of ID card printers. The company takes pride in differentiating themselves by providing quality products with improved card security features and the best warranty and support in business.
Magicard’s best selling ID card printers are the Prima4, Enduro, Rio 2e, Tango 2e and Pronto. Every ID card printers offer special and unique features which are ideal to suit the needs of every business organization. You can choose the right Magicard printer configuration to fulfill your need.
Magicard is a reliable manufacturer that looks into the future with a new era of quality, innovation and growth. Their main goal is to serve the customers in a better way by transforming the company into an innovation machine fueled by consumer insight and differentiated by superior marketing of consumer-preferred solutions.
|Print Speed||Between 30 to 40 seconds per full color (YMCK) depending on Printer model.)|
|Printing Technology||Reverse Transfer, thermal transfer with solid wax and Color Dye Sublimation|
|Card Thickness||0.25mm to 2.0mm (10 mil to 80 mil.)|
|Security Features||Holographic laminates can be applied with optional in-line laminator. New UV ribbons.|
|Standard Warranty||Three years UltraCoverPlus warranty which includes full printhead coverage and free loaner service - North America and EU only. Elsewhere 12 months limited warranty.|
|Dye Film||YMCK 1000 prints (Full-color printing).|
YMCKK 750 prints (Full-color printing of one side and black on reverse side).
YMCK-UV 750 prints (Full-color and UV.)
|Re-Transfer film||Re-transfer film 1000 prints.|
|Printhead Replacement||Simple field replaceable unit.|
|PC Interface||USB 2.0. and Ethernet fitted as standard on all models.|
|Software||Supplied with Windows 2000, XP and Vista compatible driver software.|
|Cleaning||Removable cleaning roller cassette.|
|Dimensions||340mm width x 381mm height x 340mm length. (13.4" width x 15.0" height x 13.4" length)|
|Weight||22 kg (48.5 pounds).|
"Good experience, I'm very satisfied."
"Online description of purchased item, which even had actual demo, was excellent. Ordered via phone to insure I was ordering properly. Representative handled order perfectly. Shipment arrived very promptly, even before I had cleared a space in my office to put it. Complete order process gets a 100% grade from me."
added to cart Continue shopping (5) or
Why not talk to one of our product specialists for selecting the right product?
Provide your phone or email and you are guaranteed to get 15 minutes call back. (7AM - 5PM) PST
Thank you! Your response has been sent.