
| Category: | Audio Conferencing Equipment |
| Categorization By Manufacturer: | Professional Conferencing |
| Manufacturer: | Clearone |
| Model: | 910-153-560 |
| Condition: | New |
| Freight: | $95.00 |
Conditions: Unless otherwise specified, all measurements are performed with a 22 Hz to 15kHz BW limit (no weighting)
AEC tail time: 128 ms
Adaptive noise cancellation: (6 - 18 dB)
Gating: Adaptive ambient, 1st mic priority,
look-ahead gating, NOM attenuation
Audio bandwidth: 16 kHz with
videoconferencing or other full-band networks
Connection: Female XLR
Maximum Distance from Audio Mixer to Last
Mic Box: 60 ft.
Maximum Level: +17 dBu
Frequency Response: 20 Hz to 14 kHz
THD+N: <0.01% (+14 dBu input @1 kHz)
Phantom Power: 24 V selectable
Impedence: 5 kOhm
Connection: Unbalanced RCA
Gain: -10 dBu nominal, adjustable from
-14 dB to +18 dB
Nominal Level: -10 dBu
Maximum Level: +9 dBu
Impedance: > 10 kOhm
Connection: Unbalanced RCA
Nominal Level: -10 dBu, adjustable from
-14 dB to +18 dB
Maximum Level: +9 dBu
Frequency Response:40 Hz - 15 kHz (+/-1 dB)
Dynamic Range: > 80 dB
THD+N:< 0.02% (+6 dBu input @ 1 kHz)
Connection: Unbalanced RCA
Gain: -10 dBu nominal, adjustable from
-14 dB to +18 dB
Nominal Level: -10 dBu
Maximum Level: +9 dBu
Impedance: > 10 kOhm
Connection: Unbalanced RCA
Nominal Level: -10 dBu, adjustable from
-14 dB to +18 dB
Maximum Level: +9 dBu
Frequency Response:40 Hz - 15 kHz (+/-1 dB)
Dynamic Range: > 80 dB
THD+N: < 0.02% (+6 dBu input @1 kHz)
Connection: Left and right push terminals
Power: 10 Watts into 8 Ohm load
Impedance: 8 Ohm
Frequency Response:60 Hz - 15 kHz (+/-1 dB)
Dynamic Range: > 80 dB
THD+N:< 0.5% (+5 dBu line input @ 1 kHz)
Output Level:90 dBSPL output @ 1 meter
Conditions: All measurements taken with ALC disabled.
Connection: RJ-11 (Set and Line jacks)
Tail Time: 30 ms
Frequency Response: 250 Hz to 3.3 kHz
(+/-1 dB)
THD+N:< 0.2% (+7 dBu line input @1 kHz)
Dynamic Range: > 60 dB
DB9 female
9,600/19,200/38,400/57,600
(default)/115,200
Baud rate: 8 bits, 1 stop, no parity
Hardware flow control on (default)/off
10/100 Ethernet Control Port:
RJ-45 with LED indicators for link,
duplex and activity status.
Slave port
Primary Voltage: 100 to 240 VAC
Auto-Sensing, 50-60 Hz
DIN, 9600 baud, no Flow Control
Mixer: 17" x 7.5" x 2"
(43.2 cm x 19.1 cm x 5.1 cm)
Controller: 10.5" x 4.5" x 2.75"
(26.7 cm x 11.4 cm x 6.9 cm)
Mic Box: 4.7" x 5.6" x 1.7"
(11.9 cm x 14.3 cm x 4.4 cm)
Mixer: 4.5 lb (2 kg)
Controller: 2.0 lb (.9 kg)
Mic Box: 1.5 lb (.7 kg)
Operating Temp: 32-122º F (0-50º C)
910-153-560 Converge 560 with wireless
controller
910-153-565 Converge 560 with wired
controller
910-153-050 Converge Remote Antenna
Accessory Kit
Provides advanced audio processing for superior
sound quality. Can be placed on a tabletop,
credenza, or in a standard equipment rack.


Wireless or wired controller provides intuitive interface that emulates a telephone keypad.
Allows microphone distribution boxes to be mounted in a standard equipment rack.

Converge 560 - two boxes. Each box contains three industry standard XLR microphone connectors. Boxes are daisy-chained from mixer using standard RJ-45 cables. Boxes can be rack-mounted with mixer or strategically positioned throughout room to minimize microphone cable runs.
Customize the audio settings and configure system via the built-in USB or Ethernet connection with drag-and-drop user interface.

| Manuals |
| Converge 560/590 Manual(PDFÂ -Â 9976 KB) |
| Software Downloads |
| RAV-Ware 2.1.1(ZIPÂ -Â 14,581 KB) |
| RAV-Ware 2.1.1 Release Notes (PDFÂ -Â 26 KB) |
| Datasheets |
| Converge 560/590 Datasheet (PDFÂ -Â 751 KB) |

Get the information you need, when you need it.
| Email: | |
| Password: | |
![]() | |
| Keep me logged in. | |
Enter your email address in the space provided. We'll reset your password and mail it to you.
| Email: | |

Setting up an account is quick and easy. Just type in your Name and Email address.
Note: We hate spams
