|Warranty:||3 Year Warranty|
|Read Reviews | Write a Review|
|Colors:||Colored||Type:||Medical Display Monitors|
Each color (RGB) is supported with a 10-bit input compatibility that displays up-to 1,064,330,000 colors, providing highly-crisp resolution for 3D color rendering and image fusion.
10-bit color graphics board and 10-bit color viewer software needed for 10-bit color display.
With dual link input support, monitors achieved a clock frequency of 60 Hz even when displaying QXGA (1536 x 2048) resolution. This enables frame synchronization between the computer and the monitor, which reproduces a smooth moving picture without any dropping of frames.
Graphics board with dual link compatibility required.
Selectable with the front panel buttons, the CAL Switch function allows for various calibration modes of different modalities such as CR, CT, and endoscope images. Furthermore, auto mode settings can be made with the Auto CAL Switch function.
The Image Rotation function offers hardware-based switching between portrait and landscape mode. This eliminates the need for special software and does not compromise graphics performance.
At startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level. In addition, a sensor measures the backlight
Viewing angles are 170° wide with minimal color shift when viewed from the side.
With ScreenManager Pro for Medical utility software installed, the Backlight Saver function allows for the monitor’s backlight to turn off when the screen saver is activated and the monitor’s backlight to turn on when the computer comes out of the screen saver mode. This function helps to reduce power consumption when the monitor is used for a prolonged period of time.
Narrow bezels require less eye movement in a multi-panel environment. The height and pivot adjustable stand offers added flexibility and viewing comfort.
This anti-reflective panel protector is pre-attached to the monitor at production for protection against dust and scratches.
EIZO and its authorized distributors offer a three-year limited warranty.
EIZO's confidence in its product quality extends to brightness stability which is also covered during the usage time specified in the warranty.
Meets the strictest medical, safety and EMC emissions standards including TÜV/GM, UL60601-1, CE, CB, CSA C22.2 No.601-1, VCCI, FCC, and FDA 510(k).
Acquiring ISO 13485 certification demonstrates EIZO's ability to consistently meet customer requirements for these devices and services.
Eizo Nanao designs, develops, manufactures and sells monitors, peripherals, and imaging system software. The major products of the company are LCD monitors, graphics monitors, touch panel and industrial monitors, medical display systems, home entertainment monitors, air traffic control monitors and accessories.
EIZO display systems define the current industry standards and are trusted worldwide. Their product quality is recognized for offering the best available combinations of performance, reliability, comfort and service.
|RadiForce R31: without Panel Protector|
RadiForce R31-C: with Panel Protector
|53 cm (20.8") TFT Color LCD Panel (IPS)|
Active Display Size (H x V)
|318.0 x 423.9 mm|
Viewable Image Size
|Diagonal: 529 mm|
|1536 x 2048|
|0.207 x 0.207 mm|
|10-bit colors: 1.06 billion (maximum)|
8-bit colors: 16.77 million from a palette of 1.06 billion colors
Viewing Angles (H, V)
|R31: 400 cd/m2, R31-C: 350 cd/m2|
Recommended Brightness for Calibration
|R31: 250 cd/m2, R31-C: 220 cd/m2|
On/Off Response Time
|50 ms (typical)|
Scanning Frequency (H, V)
|31 - 127 kHz, 59 - 61 Hz (VGA Text: 69 - 71 Hz, QXGA: 36 - 61 Hz)|
Frame synchronous mode: 59 - 61 Hz
|DVI Standard 1.0|
|DVI-D 24 pin|
|1 upstream, 2 downstream|
|Standard Rev. 2.0|
|AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz|
Power Save Mode
|Less than 3 watts|
|English, German, French, Italian, Japanese, Spanish, Swedish|
Height Adjustment Range
Tilt / Swivel
|40° Up, 0° Down / 35° Right, 35° Left|
Dimensions (W x H x D)
|With Stand: 368 x 515.5 - 597.5 x 208.5 mm|
Without Stand: R31 368 x 486 x 88.5 mm / R31-C 368 x 486 x 90 mm
|With Stand: R31 9.2 kg / R31-C 10.0 kg|
Without Stand: R31 6.2 kg / R31-C 7.0 kg
|VESA standard (100 x 100 mm)|
Certifications and Standards
|CE (Medical Device Directive), TÜV/GM (EN60601-1), cTÜVus (UL60601-1, CSA C22.2 No. 601-1), CB (IEC60601-1), VCCI-B, FCC-B, Canadian ICES-003-B, FDA 510(k)*, CCC, EIZO Eco Products 2002, RoHS|
|AC power cord, user's manual, Dual-Link signal cable (DVI-D ~ DVI-D), USB cable, EIZO LCD Utility Disk (RadiCS LE, ScreenManager Pro for Medical), ScreenCleaner (R31-C only), warranty card|
"I had a wonderful experience with this company, Great customer support. They were consistant with ensuring this was an excellent buying experience. They answered every question I had with patience and understanding. All companies should provide the level of customer service that these gentlmen did..Thank you again for your help."
"I would recommend Clary Business Machines without hesitation. Every part of the process was perfect - starting with good communication from their customer sales department, to emails and tracking information. They called the office to make sure everything was to our satisfaction. We are also very happy with our purchase of the shredder. It is a quality product that will last for years. Thank you Clary Business Products."
added to cart Continue shopping (5) or